I’ve had some wireless issues for quite some time now. There are dead spots in the house – a central wall has metal ducts and a gas fireplace, which are beside the laundry room with its metal-enclosed washer and dryer. About 5-6m of metal interfere with the wireless signal. The modem is attached to the cable, which comes through the north side of the house, and there are no other active cable outlets in other rooms (there are outlets for cable, but they’ve never been properly connected).
Plus the ducts and pies in the basement and the metal front door interfere with the signal out of doors, making it difficult to get good reception in a large portion of the yard – including our favourite summer sitting location; the newly rebuilt front deck.
And just to confound matters, my Acer Aspire laptop has the annoying habit of losing its internet connection – while all my other wireless devices are fine – although it can see other networks nearby and even connect to my modem. Just not the net.
I’ve looked at all sorts of solutions, from wireless extenders and bridge routers, to rewiring a large portion of the house to accommodate moving the cabling to allow the modem to be placed closer to the laptop. I’ve moved the modem a few times, but the reception has only improved indoors – out of doors it remains unstable.
There is often a 10-metre ethernet cable running across the floor between laptop and modem when I want to be sure my access isn’t interrupted. Susan hates it. It’s a trip hazard and looks hokey.
This week I decided to try a different approach (a suggestion from Neville on Facebook): a powerline (aka homeplug) network extender. It’s a whole area I knew nothing about before this week, except for the vague understanding that the network connects via the AC power lines in your home.
Basically you plug one adapter into a wall socket and attach it to your modem via a (shorter) ethernet cable. They you plug in a second adapter somewhere else in your house, preferably close to your computer, do whatever the device needs to establish a connection (in my case, push a button). When they connect, you plug another (shorter) cable into the adapter and your computer.
But which one? Which type, which standard, which brand, which feature set? That’s what I spent most of my past few days studying. Reading reviews, technical papers, speed tests, manufacturers’ claims. Prices range from $40 to almost $150 for the minimal two adapters. Why the difference and would it really matter to me?
In the end I went low-end rather than cutting-edge. I bought a D-Link “PowerLine AV 500 Network Starter Kit (DHP-309AV) from the local Staples store. Took all of two minutes to set it up, another minute to connect cables and my laptop was connected to the internet.
And if it proves itself in the upcoming months, I may look at the new models due out this fall to upgrade to the new AV2 standard, and get some extra ethernet ports strung around the house.
2,980 total views, no views today